kz45

Until recently they were all AA's, Now I run Fiocchi. I was looking at the lifter and it has a rim on the right side and not on the left, its a TTI welded lifter. I wonder if that could be part of it? if so you'd think more guns would have this problem. I broke the Dremel out and some wet/dry sandpaper and it feels real smooth now.

No more than 6000. I did the loading port, and it's not very aggressive.

What would cause this excessive wear in my M2 receiver? What's happening is the shell is wearing a groove in the receiver deep enough to cause the bolt to stick to the rear and not close, I'm about to get in there and feather it out in hopes of fixing it. It's starting to look like a Roth XB3G might have to find its way to my house.

I think the barrel and comp are one piece

I just watched a vid of of a shotgunner from Japan showing off his M2 Mods. In it he does a open bolt reload, loading two from the bottom and then it auto loads one in like an A5. How is this done? I have mine so that i can load with the bolt out of battery but not bolt locked back. Do I need to just remove more material?

Tasha, she's my avitar

Loosen the screws that hold the primer assembly to the press, just a touch, see if that helps

Im getting into CO

Alls good again, I think it was the breech bolt latch, you could visibly see a difference. Shot 50 rounds today with no hang ups, going shoot a match tomorrow

Delta Point Pro,

No problem with mag changes? Sent from my iPhone using Tapatalk Pro

How deep can the decocker model be milled? Using the bottom of the optic to keep the FP block retained? Has anyone done this if so I'd love to see pics and get an idea of depth of cut Sent from my iPhone using Tapatalk Pro

Thank you for the reply, Im sure thats what I did, I found a detailed thread on calguns,net that shows close up pics of my mistake

I installed a CGW Pro Package a few days ago, the trigger is awesome! My concern is before i did the install the decocker had a lot of spring tension, now with the new trigger the spring tension is almost completely gone, over half the travel down is no tension and it won't spring back and stay. Is this normal? the gun functions fine other than that.

I have a lifter spring coming along with a breech bolt latch and recoil spring, im going to install all those and see what happens.

Sent from my iPhone using Tapatalk Pro

My M2 bolt started staying to the rear with a shell on the carrier, ive tried all the fixes [ i think] new mag spring, longer follower [OR3Gun] thinking the nose of the shell was catching on the lip coming out the tube, I took it apart to polish the bolt release lever another fix I found here, thats when i noticed the groove made by the rim o \f the shell as it rubbed against the side of the receiver along its path out the tube and up into position to be chambered, Im guessing less than 5000 rounds this cant be normal!? anyone else out there have this problem, whats the fix? Ive polished the groove and tapered it which has helped but i need to stop it from getting worse!

I have no use for a thumb rest! Lol

I would 3-gun on mine, K1200RS, it did have bags though! A back pack is plenty big enough for a pistol match, as far as gear I would put my gloves in my helmet on my tank and cover it with my jacket, never had anything come up missing

I love the reticle, FC-3G works great! its clear and bold enough that it doesn't need to be lit. My problem is its only a four power scope, I need a 1-6

Lololololilol!!!!

150 swc with E3

I had a similar problem, removing one of the springs from the aftec extractor solved the problem

Is this something you've teamed up with Ruger and let the cat out the bag early? I've googled it and can't find it! I need a back up for my M2

I'm sure they take your info and amount and notify the irs! :-)